Solenoid Vented Loop

Superior composite siphon break solutions for marine applications

Ac42f1fa039e25fd17faa747fcdbddb6 full

Solenoid Vented Loop

Designed and made in New Zealand, Tru-Design Vented Loops with Solenoid are the superior composite siphon break solutions for marine applications. Vented Loops prevent water siphoning from underwater skin fittings back into a vessel and thereby guard against accidental flooding and sinking.

Vented Loops are used predominantly in toilet to overboard applications, toilet inlet applications and holding tank to overboard applications. They can also be used in genset or small engine inlet cooling water systems.
A Solenoid controlled Vented Loop allows the vent to be switched to fully closed. This eliminates air entering the system as occurs with a standard vented loop. The solenoid used is normally open, requiring power only to close the valve.

Vented Loops are moulded from a glass reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability to our loops.


Download Info Sheet

Features

  • Manufactured from a glass reinforced nylon composite - High strength and light weight
  • Robust polymer covered solenoid - Long life in the marine environment
  • Diaphragm valve - Faster breaking of siphon due to larger flow rate available
  • Female threaded Solenoid Valve - No brass/bronze adapter to corrode
  • Constant internal diameter - No reduction in flow
  • Self-contained mounting - 3 screw mounting posts give secure and easy installation
  • Chemical resistant - Impervious to diesel, petrol and antifouling paints
  • UV resistant - These fittings will not break down with ultraviolet light or discolour from the sun
  • High quality surface finish - Will not discolour with green film as similar bronze fittings do
  • Large operating temperature range - Suitable for all marine environments, from -40°C to +110°C.

Frequently Asked Questions

  • Can I use a vented loop on the intake hose on an electric toilet ?

    Yes Our vented loops fitted with solenoids are designed for electric toilets so the solenoid valve shuts off when you push the flush button so you get full flow then it reverts to an anti-siphon when the flush button is released.

Models

F51730586b8ae6785b1738aa28db3146 grid
Solenoid Vented Loop

90462

with 12V Solenoid 19mm

2386e9b6bf01a403f209e3416855dfe7 grid
Solenoid Vented Loop

90463

with 12V Solenoid 25mm

6f9c08033bc3a545f456b434dabfd1bc grid
Solenoid Vented Loop

90464

with 12V Solenoid 38mm

2386e9b6bf01a403f209e3416855dfe7 grid
Solenoid Vented Loop

90624

with 24V Solenoid 19mm

2386e9b6bf01a403f209e3416855dfe7 grid
Solenoid Vented Loop

90625

with 24V Solenoid 25mm

6f9c08033bc3a545f456b434dabfd1bc grid
Solenoid Vented Loop

90626

with 24V Solenoid 38mm

Cdfb0b623b750d900785197b1306b84a grid
Solenoid Vented Loop

90534

24V Solenoid only

Cdfb0b623b750d900785197b1306b84a grid
Solenoid Vented Loop

90467

12V Solenoid only